Centrifugal pump
CPM series | |
function: | |
Max flow: | 160 l/min(9.6m3/h) |
Max head: | 58 m |
Max suction: | 7 m |
Max T water: | + 90℃ |
Max T E: | + 40℃ |
Installation and use: |
It is recommended to extract clean water without abrasive particles and liquid without chemical corrosion to pump material. Instead of iron, high-performance polymers or copper are used to prevent corrosion. |
In view of the hydraulic characteristics of the pump, coupled with its tight design, the pump is suitable for industrial applications. This pump must be installed in a closed environment or at least prevent exposure to severe weather conditions. |
material: |
Pump case: cast iron with ISO 228 / 1 standard threaded interface。 |
Pump base: stainless steel AISI 304 material, higher power using cast iron material. |
Brass impeller: suitable for CP100-CP 132-CP 152-CP 150-CP 170-CP 190-CP |
Stainless steel impeller: suitable for CP 130-CP 158 |
Motor shaft: stainless steel EN 10088-3-1.4104 |
Mechanical Seal: Ceramic-Graphite NBR Rubber |
Motor: pump body and PEDROLLO motor compact combination, motor running noise low, complete fan cooling (TEFC), suitable for continuous operation. |
CP: single phase 230 V 50/60 Hz with capacitors and overload protectors. |
CP: three-phase 230 400V-50/60 Hz. |
Insulation grade: F |
protection grade: IP44 |
專注彈性體提供商
年新材料生產(chǎn)研發(fā)經(jīng)驗(yàn)