Multistage pump
2CP series | |
function: | |
Max flow: | 400 l/min (24 m3/h) |
Max head: | 112 m |
Max suction: | 7 m |
Max T water: | + 90℃ |
Max T E: | + 40℃ |
Installation and use: |
It is suggested that 2CP pumps can be used to extract water without abrasive particles and liquids without chemical corrosion. 2CP pumps are of high efficiency, wide use and can even be used for rare applications, making them the most ideal choice in the domestic industrial field. Especially in combination with the pressure tank for water distribution; increase the main line of power supply pressure, also used in fire protection facilities. The pump must be airtight or at least not exposed to adverse weather conditions. |
material: |
Motor shaft: EN 10088-3-1.4104 stainless steel |
Mechanical Seal: Ceramic-Graphite NBR Rubber |
Motor: pump body and PEDROLLO motor close combination, motor efficient (power EFF1 level, from 4-7.5kW) operation, low noise, complete fan cooling (TEFC), suitable for continuous operation. |
2CPm:Single phase 230V-50Hz with capacitors and overload protectors (up to 1.5kW) |
2CP:Three phase 230% 400V-50 Hz, highest 4kw 400/690V-50Hz , 5.5-7.5kw |
Insulation grade: F |
protection grade: IP44 |
2CP 25/130N |
Pump case: cast iron with a helical interface that conforms to ISO 228 / 1. |
Pump base: AISI304 stainless steel material |
Impeller: AISI304 stainless steel with centrifugal scattering blade. |
Other 2CP pumps |
Pump case: cast iron with a helical interface that conforms to ISO 228 / 1. |
Impeller: brass with centrifugal scattering blade |
專注彈性體提供商
年新材料生產(chǎn)研發(fā)經(jīng)驗(yàn)